Manual Tube Puller
Ideally suitable for small maintenance job. Manual tube puller allows easy removal off stubs and tubes. Can be use with impact wrench in combination with drive socket.
Specifications
| Tube Size | Tube Puller Model Number | Spare Spear Model Number | ||||||
| O.D. | BWG | Wall Thickness | I.D. | |||||
| mm | inch | mm | inch | mm | inch | |||
| 6.35 | 1/4 | 18 | 1.24 | 0.49 | 3.86 | .152 | MTP-25-18 | MPS-25-18 |
| 9.52 | 3/8 | 16 | 1.65 | 0.65 | 6.22 | .245 | MTP-38-16 | MPS-38-16 |
| 9.52 | 3/8 | 18 | 1.24 | 0.49 | 7.04 | .277 | MTP-38-18 | MPS-38-18 |
| 9.52 | 3/8 | 20 | 0.88 | 0.35 | 7.75 | .305 | MTP-38-20 | MPS-38-20 |
Push Type Internal Tube Cutter – ATP Series
SUBZERO make ATP series tube cutters are designed to cut walls of tubes internally.
Features:
- Quick method of cutting ferrous or non-ferrous tubes.
- Tool can be used with standard Electric or Pneumatic drive.
- Two piece body and mandrel construction allow for quick and easy tool replacement.
Operation
- Connect the tool to drive.
- Insert the tool in to the tube.
- Start the drive & apply inward pressure.
- Tube will cut in few seconds.
Specifications
| Tube O.D. | Tube Gauge (BWD) | Tube Cutter Model No. | Spare Cutting Bit Model No. | Size |
| 5/8″ | 14-22 | ATP-625 | ATP-625-SB | 3/8″ |
| 3/4″ | 14-22 | ATP-750 | ATP-750-SB | |
| 7/8″ | 14-22 | ATP-875 | ATP-875-SB | |
| 1″ | 12-22 | ATP-1000 | ATP-1000-SB | |
| 1.1/4″ | 12-22 | ATP-1250 | ATP-1250-SB | 1/2″ |
| 1.1/2″ | 12-22 | ATP-1500 | ATP-1500-SB |
Standard adjustable reach is 4″(101.6mm) and they are available in optional increments of 2″(50.8mm).
“A” reach= 6″(152.4mm). “B” reach= 8″(203.2mm). “C” reach= 10″(254.0mm).
Recommended Drive
| Model | Tube Size | Chuck Size | Weight (Kg) |
| Drive-3 | 5/8″ – 1″ | 3/8″ | 8.5 |
| Drive – 5 | 1.1/4″ – 1.1/2″ | 1/2″ | 7.5 |
Internal Tube Cutter – PR68 Series
Features:
- PR-68 tube cutters are ideal for cutting thick walled boiler tubes.
- The Internal Tube Cutter PR-68 is driven via the square in a clockwise direction using either an electric, pneumatic or hydraulic driving machine.
- cutters are available in standard reach of 4″ (100mm). Additional reaches in increments of 4″ are available up to 16″ (400mm).
Specifications
| Size | Tools Model Number | Spare Bit Model Number | Tube I.D. Range | Max. Tube O.D . | Body Daimeter | Drive Square male | |||
| mm | Inch | mm | Inch | mm | Inch | ||||
| 195 | 0681951 | 1681951 | 20-25 | .787-.984 | 34 | 1.339 | 19.5 | .768 | 1/2″ |
| 245 | 0682451 | 1682451 | 25-30 | .984-1.181 | 38 | 1.496 | 24.5 | .965 | |
| 290 | 0682901 | 30-35 | 1.181-1.378 | 43 | 1.693 | 29 | 1.142 | ||
| 330 | 0683301 | 1682901 | 35-40 | 1.378-1.575 | 48 | 1.890 | 33 | 1.299 | |
| 380 | 0683801 | 40-50 | 1.575-1.969 | 58 | 2.126 | 38 | 1.496 | ||
| 480 | 0684801 | 50-60 | 1.969-2.362 | 68 | 2.677 | 48 | 1.890 | 3/4″ | |
| 530 | 0685301 | 1684801 | 55-65 | 2.165-2.559 | 73 | 2.874 | 53 | 2.087 | |
| 630 | 0686301 | 65-75 | 2.559-2.953 | 83 | 3.268 | 63 | 2.480 | ||
| 730 | 0687301 | 75-85 | 2.953-3.346 | 93 | 3.661 | 73 | 2.874 | ||
| 830 | 0688301 | 1687301 | 85-95 | 3.346-3.740 | 103 | 4.055 | 83 | 3.268 | |
| 930 | 0689301 | 95-105 | 3.740-4.134 | 113 | 4.449 | 93 | 3.661 | ||
One Revolution Internal Tube Cutter – OTC Series
These tool is designed for hand operation using ratchet or hand wrench for cutting ferrous and non-ferrous tubes. The cutter bit operates on an eccentric principle with the cutter bit in the closed position insert the cutter in to the tube to be cut. Apply wrench and turn in a clockwise direction. The tool bit will move out and pierce the tube wall. Continued turning and cut the tube off in one revolution. The cutter is then turned counterclockwise slightly to close the bit allowing the cutter to be removed from the tube.
Standard cutter available with 6 inch reach extra long cutter available on request.
Specifications
| Tube O.D. | Tube Gauge | Tube I.D. | Cutter Model No. | Spare Bit Model No. | ||
| mm | inch | BWG | mm | inch | ||
| 15.87 | 5/8″ | 14 15-16 17-18 19-20 22 |
11.4-11.9 12.0-12.9 12.7-13.5 13.5-14.2 14.0-14.7 |
.450-.470 .472-.510 .500-.531 .531-.560 .550-.580 |
OTC-625-14 OTC-625-16 OTC-625-18 OTC-625-20 OTC-625-22 |
OTC-625-SB |
| 19.05 | 3/4 | 14-15 16 17-18 19-20 |
14.7-15.5 15.2-16.0 15.9-16.5 16.7-17.5 |
.580-.610 .600-.630 .625-.650 .660-.690 |
OTC-750-14 OTC-750-16 OTC-750-18 OTC-750-20 |
OTC-750-SB |
| 22.22 | 7/8 | 14-15 16-17 18 19-20 |
17.8-18.5 18.8-19.5 19.3-20.0 19.8-20.6 |
.700-.730 .740-.770 .760-.790 .780-.810 |
OTC-875-14 OTC-875-16 OTC-875-18 OTC-875-20 |
OTC-875-SB |
| 25.40 | 1″ | 14 15 16-17 18-20 22 |
20.8-21.6 21.3-22.1 22.8-22.6 22.6-23.1 23.9-24.6 |
.820-.850 .840-.870 .860-.890 .890-.910 .940-.970 |
OTC-1000-14 OTC-1000-15 OTC-1000-16 OTC-1000-18 OTC-1000-22 |
OTC-1000-SB |
Tube Wall Reducer
in standard drill machine. Front end is suitably grounded as per tube gauge to facilitate reduction of fube thickness there by weakening expansion joint of tube for it removal.
Specifications
| Tube O.D. inch | Model Number | MT Shank # |
| 3/8 | WR-375 | 1 |
| ½ | WR-500 | 2 |
| 5/8 | WR-625 | 2 |
| 3/4 | WR-750 | 2 |
| 7/8 | WR-875 | 2 |
| 1 | WR-1000 | 3 |
| 1.1/4 | WR-1250 | 3 |
| 1.1/2 | WR-1500 | 3 |
| 1.3/4 | WR-1750 | 3 |
| 2 | WR-2000 | 3 |
| 2.1/2 | WR-2500 | 4 |
| 2.3/4 | WR-2750 | 4 |
| 3 | WR-3000 | 4 |
| 3.1/4 | WR-3250 | 4 |
| 3.1/2 | WR-3500 | 4 |
| 4 | WR-4000 | 4 |
Tube Wall Reducer
Build from high impact steel for knocking out tube from tube sheet with pneumatic hammer. Front end macliined as per tube gauge for correct alignment of tooT there by facilitating removal of tube without damaging tube sheet.
Specifications
| Tube O.D. inch | Model Number |
| 3/8 | KT-375 |
| ½ | KT-500 |
| 5/8 | KT-625 |
| 3/4 | KT-750 |
| 7/8 | KT-875 |
| 1 | KT-1000 |
| 1.1/4 | KT-1250 |
| 1.1/2 | KT-1500 |
| 1.3/4 | KT-1750 |
| 2 | KT-2000 |
| 2.1/2 | KT-2500 |
| 2.3/4 | KT-2750 |
| 3 | KT-3000 |
| 3.1/4 | KT-3250 |
| 3.1/2 | KT-3500 |
| 4 | KT-4000 |
Collapsing Tool
Used for collapsin.Q the nonferrous tubes or ferrous tube made thinner using tube wall reduce for driving fhe tube out of tube sheet. Preferably to be use with pneumatic hammer.
Specifications
| Tube O.D. inch | Model Number |
| 3/8 | CT-375 |
| ½ | CT-500 |
| 5/8 | CT-625 |
| 3/4 | CT-750 |
| 7/8 | CT-875 |
| 1 | CT-1000 |
| 1.1/4 | CT-1250 |
| 1.1/2 | CT-1500 |
| 1.3/4 | CT-1750 |
| 2 | CT-2000 |
| 2.1/2 | CT-2500 |