Flow Meters

Coriolis Flow Meter – CPFM 8800 Coriolis Mass Flow Meters

The CPFM 8800 Series is a family of advanced flow meters based on the Coriolis principle. Fabricated exclusively from PFA (Perfluoroalkoxy) polymeric material, the CPFM is ideal for high purity applications.

Design Features

• Response is independent of the fluid’s physical and chemical properties including Viscosity
• Mass flow calibration is fluid independent eliminating the need to calibrate on different fluids
• Accuracy unaffected by flow regime (e.g. laminar or turbulent flow) or variations in flow velocity profile
• Sensors operate and measure in two-phase flow conditions with gas

Magnetic Flow Meter – FLOMID FX series

FLOMID FX series is an advanced magnetic flow meter that is suitable for measuring conductive liquids with great accuracy and repeatability. Because of no moving parts or obstruction in the meter body the flow meter offers very low pressure drop and high durability. It comes in compact (integral) as well as remote (separated) mounted versions.

Design Features

• Flow rate measurement is independent of the flow profile
• Readings are independent of density, temperature, viscosity and pressure
• Absence of obstructing elements gives zero pressure loss and will allow the pass of solids
• Can be installed with short straight pipe sections (5 x DN / 3 x DN)
• Suitable for corrosive liquids

Kinetic Flow Meter – KFM 2100 Kinetic Flow Meters

KFM 2100 Series is an advanced flow element that is suitable for liquid, gas and steam flow measurement with high accuracy and repeatability. This is due to the patented design that uses a stream-lined bullet shaped flow element that causes minimum disruption to the flowing medium with low pressure drop but providing unmatched turndown.

Design Features

• A novel design approach in fluid flow measurement
• High turn down
• No moving parts
• No need for straight runs
• Stream-lined measuring section: low pressure drop
• Measurement is independent of flow regime; suitable for laminar, turbulent and transition flow conditions
• Volumetric and mass flow measurement with built-in temperature sensor option
• High accuracy and repeatability
• Suitable for liquids, gases and steam
• Patented design (Patent No. US 7,478,565 B2)

Oscillating Piston Flow Meter – Covol

Covol volumetric counter is an ideal meter for viscous fluids such as oils, waxes and polymers. The sensor is constructed in SS-316, PVC, PP and PTFE material options to suit corrosive applications. It can be easily cleaned and sterilised.

Design Features

• Viscosity up to 120,000 mPa.s
• It will work in any position
• High pressure versions available
• It does not need straight pipe runs

Application

• Ideal meter for viscous fluids such as oils, waxes and polymers

Oval Gear Flow Meter

Oval Gear Flow Meters are positive displacement type ideally suited for high viscosity fluids and for monitoring low flow rates. These are available with rotors made of special materials like PPS resin, PEEK resin, stainless steel and other special resins. Viscosity ranges from 0-5 mPa to 500 mPa and can be handled under operating temperatures from -10°C to +60°C. These are simple, elegant and firm constructions with built in pulse generators. Multiple flow control systems can be made up with Valvings. It is ideally suited for fine chemical processes, combustion appliances and humidification appliances.

Standard Specifications

Note: All flow meters must be fitted with a strainer which can withstand 1.5 MPa pressure with SS 316 mesh incorporated.

Paddlewheel MW 100 Flow Meter Mini-Wheel Flowmeter with In-line Flow

Tangential turbine flow meters continue to be the most common way to measure flow electronically in a wide range of industries. Enhancements to tangential turbine flow meter systems are producing a flow-sensing device that is smaller, easier to install and more accurate than ever before. A line of Tangential Turbine (also called Paddle Wheel) Flow meters that utilise sophisticated circuitry to foster signal conditioning is manufactured.

The rotational velocity of the rotary wheel varies linearly with the average velocity of the fluid flowing through the flow meter. A square wave pulse is generated by a hall effect from magnets embedded in the vanes of the rotor wheel. Depending on the output version of the MW-100, the pulse signal is relayed directly, converted to a 0-5 VDC (voltage) output. The voltage model is span-adjustable over the flow range of the unit.

Standard Specifications

Paddlewheel M 10001 Flow Meter

Low Flow Paddlewheel Flowmeter

• Very low flow sensitivity
• State-of-the-art electronics – high reliability
• 4-20 mA, 0-10 VDC or pulse output
• Adjustable flow switch built in
• Small foot print
• For liquids only
• Repeatability ± 0.5%

Standard Specifications

Click here to download product data sheet

Paddlewheel M 1000 Flow Meter
Paddle Wheel flow meters have an outstanding accuracy and wide flow range capability. These are tangential turbine type and with state of art electronics have very high reliability. These have a built in adjustable flow switch which can be used to modify supply lines based on specific applications. Ideal for fuel cell and other microflow applications, these are made with different materials based on use of customer.

Standard Specifications

Rotameters Flow Meter – 6001/6002 Glass Tube Variable Area Flow Meter

6001/6002 series glass tube rotameters are designed according to VDI/VDE 3513 standards. Its clear borosilicate tapered glass tube with scales help flow reading with great accuracy and ease. End connection options such as screwed end connections, flanges and sanitary couplings make it suitable for all kind of process industries.

Design Features

• Easy installation, no straight pipe required
• Low pressure drop
• Adjustable alarms operated magnetically or with infra-red light
• Measuring tube in borosilicate glass
• Steel construction, coated with Polyamide 11
• Connections in steel, SS 316, PVC and PTFE

Rotameters Flow Meter – 2000 Series Variable Area Purge Meters

2000 series variable area purge meters use a tapered borosilicate glass tube with a fine threaded regulating valve for precise flow adjustment. Various flow tube lengths such as 100 mm, 150 mm and 300 mm are available. Its compact construction with reduced dimensions facilitates easy installation and mounting on control panels.

Design Features

• Easy installation
• Short mounting length
• No straight pipe required before or after the flow meter
• Vertical mounting for rising fluid flow
• Horizontal inlet and outlet connections
• High and low flow alarms (optical, inductive or hall effect sensor)
• Constant flow regulators RCA or RCD

Rotameters Flow Meter – SC250 and SM250 Metal Tube Variable Area Flow Meter

SC250 and SM250 model metal tube variable area flow meters are suitable for gases, liquids and steam flow measurement. It uses a robust metal tube construction with an optional plastic liner to handle tough and corrosive process fluids.

Design Features

• Linear scales
• High performance measurement in extreme working conditions
• High resistance to temperature, pressure and corrosion
• Low pressure drop
• Damping mechanism to avoid float bounces in gas applications

Target Flow Meter – DP65 and DP500 Series

DP65 and DP500 series target flow meters are suitable for liquid and gas flow measurement. Its design and robust construction makes it suitable for tough applications including the liquids containing solid particles.

Design Features

• Metallic, simple and robust construction
• Operates horizontally or vertically
• Low pressure Ddrop
• Straight pipe requirement of only 3 x DN before and after
• Provides a good measurement for fluids containing suspended solids
• Local or remote volume totalizer

Thermal Mass Flow Meter – MTMF Series 2

The MTMF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTMF Series measures the mass flow rate of gases in 4 ranges from 0-750 NLPM to 0-1500 NLPM as range table.

Thermal Mass Flow Meter – MTLFC Series 1

The MTLFC Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTLFC Series measures the mass flow rate of gases in 4 ranges from 0-250 NmLPM to 0-500 NmLPM as range table.

Thermal Mass Flow Meter – MTMF Series

The MTMF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTMF Series measures the mass flow rate of gases in 3 ranges from 0-100 NmLPM to 0-200 NmLPM as range table.

Thermal Mass Flow Meter – MTHF Series

The MTHF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTHF Series measures the mass flow rate of gases in 18 ranges from 0-10 NLPM to 0-50 NLPM as range table. The MTHF Series combine mass flow transducers with an electromagnetic proportional valve. Valves are not recommended as shut of valves. Controllers us a 0-5 V DC liner set-point signal supplied from the local set-point point or from a remote source.

Gas Thermal Mass Flow Meter – MTF 4000

The MTF-4000 series is designed for a wide array of applications including those for the semiconductor and bio-medical industries. Low cost and high performance are achieved by using the latest circuit designs, sensors and microprocessor technology. The MTF-4000 has many output functions including an RS-485 interface, LED display, hi/low alarm, open collectors and 0 – 5 VDC output. Based on these output functions, it is very easy to configure and operate an accurate flow measurement system.

Applications

• Semiconductor industries
• Bio-medical industries
• Petroleum and gas industries
• Utility services

Turbine Flow Meter – TM44

The TM44 series turbine flow meter is used in precise measurement of clean fluid flow. The TM44 can be supplied as a basic sensor with a pulse output or a 4-20mA output. Alternatively, a number of electronic units are available to provide batch control, totalisation and a display of instantaneous flow rate. The standard TM44 turbine flow meter is resistant to most severe process fluids including acids, alkali, solvents, water, CIP fluids, oil, minerals, petrochemical products, cryogenic liquids and other liquids.

Design Features

• Accuracy better than ± 0.5%
• Low pressure drop
• Vertical or horizontal installation
• Flanged and screw connections

Turbine Wheel Flow Meter

The MTMF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTMF Series measures the mass flow rate of gases in 4 ranges from 0-750 NLPM to 0-1500 NLPM as range table.

Design Features

• Available in five flow rate ranges – capable of measuring flows from 0.2 to 20 L/min (5.2 GPM)
• Cast stainless steel construction insures compatibility with a wide range of fluids for a very economical price
• Highly accurate – all MTW series flow meters provide ± 3% full scale linearity
• Flow switch functionality – easy access filed adjustable relay to provide a single flow alarm contact closure available as an option
• Compact size – ideally suited for use in constrained spaces

Vortex Flow Meter – VF-2200 Vortex Flow Sensor for Ultra-Pure Water

The VF-2200 Flow Sensor is an improved version of the well-received VF-2000 and has a wider flow range than VF-2000. The VF-2200 Flow Sensor is a cost-effective instrument for the measurement of liquid flow.
A simple and compact design makes the VF-2200 a good choice for the measurement of water, pure water and cooling water. Current output model, Pulse output model and Display model with current / alarm outputs are available. Fitting is selectable from various types according to use.
Design Features

• Simple and compact design: The VF-2200 flow sensor is assembled with a few pieces of components. The sensor body and shedder bar (vortex generator) are moulded as one component. This design approach has reduced the cost as well as the size and weight of the flow meter. Sensor body is made of PPS (Polyphenylene Sulphide) and is designed to eliminate deposits
• No maintenance cost: The VF-2200 has no moving parts, thus no maintenance is needed
• Low pressure loss: A combination of straight flow path and shedder bar gives a lower pressure loss compared with other types of flow meters
• Display model with current and alarm output: 3-digit LED display for flow rate, current output and alarm outputs (2-point) are provided in compact design
• CE marking: The VF-2200 meets the EC directive for CE mark

Vortex Flow Meter – VF-2000 Vortex Flow Sensor for Water

The VF-2000 flow sensor body and shedder bar (vortex generator) are moulded as one component. Sensor body is made of PPS (Polypylene Sulphide) and is designed to eliminate deposits. A combination of straight flow path and shedder bar gives a lower pressure loss compared with other types of Polypylene Sulphide flow meters.

Design Features

• Simple and compact design: The VF-2000 flow sensor body and shedder bar (vortex generator) are moulded as one component. This design approach has reduced the cost as well as the size and weight of the flow meter. The sensor body is made of PPS (Polyphenylene Sulphide) and is designed to eliminate deposits
• No maintenance cost: The VF-2000 has no moving parts, thus no maintenance is needed
• Low pressure loss: A combination of straight flow path and shedder bar gives a lower pressure loss compared with other types of flow meters
• Display model with current and alarm output: 3-digit LED display for flow rate, current output and alarm outputs (2-point) are provided in compact design
• CE marking: The VF-2000 meets the EC directive for CE mark